[1] |
H. K. Chen , “Mechanical Foundation,” China Labor Social Security Press, Beijing, 2007
|
[2] |
L. J. Chen, C. li, and A. Q. Zhang , “Reconstruction and Motion Simulation of D-Type Knotting based on Reverse Engineering,” Journal of Agricultural Mechanics, Vol. 45, No. 13, pp. 104-108, 2014
doi: 10.6041/j.issn.1000-1298.2014.12.017
|
[3] |
J. Dong and Y. Wen ,“Rotational Swashplate Pulse Continuously Variable Transmission based on Helical Gear Axial Meshing Transmission,” Chinese Journal of Mechanical Engineering, Vol. 25, No. 6, pp. 1138-1143, 2012
doi: 10.3901/CJME.2012.06.1138
|
[4] |
W. Huang, Z. Y. Zhang, Z. Q. Liu , “Pro/Engineer Simulation and Action Function Analysis of D-Type Knotter,” Research on Agricultural Mechanization, pp. 58-60, 2009
|
[5] |
H. Li, J. He, H. W. Li , “Study on the Spatial Parameters of the Knotting Machine of the Square Bundle Balere,” Journal of Agricultural Machinery, Vol. 44, No. 8, pp. 9-105, 2013
|
[6] |
H. Li, J. He, Q.J. Wang, H.W. Li, and R. R. Gautam , “Design and Experiment of D-Type Knots Knotters on Chinese Small Square Balers,” Chinese Journal of Mechanical Engineering, Vol. 27,No. 1,pp. 154-165, 2014
doi: 10.3901/CJME.2014.01.154
|
[7] |
H. Li, H. W. Li, J. He , “Construction and Optimization of the Drive Plate for D-Type Knotting Machine with Square Straw Baler,” Journal ofAgricultural Mechanization, Vol. 26, No. 5, pp. 97-102, 2010
|
[8] |
H. T. Li, Y. Xiong, L. J. Chen, S. Y. Zhang, X. Li, L. J. Han , “Wear Analysis and Improved Design of Cutting Rope Tripping Mechanism,” Journal ofAgricultural Machinery, Vol. 46, No. 3, pp. 118-124, 2015
|
[9] |
S. Li , “D-Type Knotted Rope Tied Knot Principle and Optimization Design,” Ph.D. Jiangsu University, 2011
|
[10] |
J. Lu , “Study on Structure and Parameter Optimization of the D-Type Knotter of Straw Baling Machine,” Ph. D. Northeast Agricultural University, 2014
|
[11] |
D. Z. Ren, C. G. Wang, X. Y. Li , “Drive Tooth Plate Modal Analysis of D-Type Knotter,” Agricultural Mechanization Research, pp. 58-65, 2014
|
[12] |
G. Su, J. X. Shi, J. Ge , “Measurement of the Space Angle of the Knotting Machine of a Baling Machine based on Reverse Engineering,” Journal ofAgricultural Machinery, Vol. 39, No. 6, pp. 81-83, 2008
|
[13] |
Z. L. Sun, G. Z. Ji, Y. T. Yan, and Q. Yang , “Design and Analysis Technology of Mechanism Motion Reliability,” National Defense Industry Press, Beijing, 2015
|
[14] |
Q. H. Wan, K. Bu, Z. Y. Zhang, B. S. Li , “Structure and Motion Analysis of D-Type Knotting Device,” Agricultural Mechanization Research, pp. 17-19, 2009
|
[15] |
J. R. Xu , “Research on CAD /CAM of Acceleration and Deceleration Cam Mechanism,” Journal ofMechanical Engineering and Automation, No. 5, pp. 71-72, 2011
|
[16] |
Y. Xiong, H. T. Li, S. Y. Zhang, L. J. Chen, X. Li, L. J. Han , “Study on the Motion Law and Design Basis of a Knot Cutter to Cut the Rope Tripping Mechanism,” Journal of Agricultural Mechanization Research, No. 7, pp. 113-118, 2015
|
[17] |
J. J. Yin, S. li, and Y. M. li , “Simulation and Timing Analysis of D-Type Knotter and Its Auxiliary Mechanism,” Journal ofAgricultural Machinery, Vol. 42, No. 6,pp. 103-107, 2011
|