Int J Performability Eng ›› 2019, Vol. 15 ›› Issue (1): 35-44.doi: 10.23940/ijpe.19.01.p4.3544
Previous Articles Next Articles
Nan Zhang, Guangjun Jiang(), and Jie Zhou
Revised on
;
Accepted on
Contact:
Jiang Guangjun
E-mail:jiang2003@imut.edu.cn
Nan Zhang, Guangjun Jiang, and Jie Zhou. Reliability-based Interval Optimization for the Disc-Mill Cutter Machining TC17 Blisk-Tunnel [J]. Int J Performability Eng, 2019, 15(1): 35-44.
Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks
Table 2
Design of the experiment and cutting force"
No. | $v$(m/min) | ${{f}_{c}}$(mm/tooth) | ${{a}_{w}}$(mm) | $F$(N) |
---|---|---|---|---|
1 | 30 | 0.020 | 28 | 1098.6 |
2 | 30 | 0.035 | 33 | 1246.8 |
3 | 30 | 0.050 | 38 | 1538.7 |
4 | 30 | 0.065 | 43 | 1808.6 |
5 | 30 | 0.080 | 48 | 2158.4 |
6 | 40 | 0.020 | 33 | 1127.4 |
7 | 40 | 0.035 | 38 | 1317.5 |
8 | 40 | 0.050 | 43 | 1577.9 |
9 | 40 | 0.065 | 48 | 1867.3 |
10 | 40 | 0.080 | 28 | 2249.3 |
11 | 50 | 0.020 | 38 | 1196.3 |
12 | 50 | 0.035 | 43 | 1398.5 |
13 | 50 | 0.050 | 48 | 1614.8 |
14 | 50 | 0.065 | 28 | 1915.7 |
15 | 50 | 0.080 | 33 | 2434.9 |
16 | 60 | 0.020 | 43 | 1239.3 |
17 | 60 | 0.035 | 48 | 1436.9 |
18 | 60 | 0.050 | 28 | 1651.7 |
19 | 60 | 0.065 | 33 | 2019.3 |
20 | 60 | 0.080 | 38 | 2591.8 |
21 | 70 | 0.020 | 48 | 1365.9 |
22 | 70 | 0.035 | 28 | 1508.2 |
23 | 70 | 0.050 | 33 | 1726.9 |
24 | 70 | 0.065 | 38 | 2187.1 |
25 | 70 | 0.080 | 43 | 2785.3 |
Table 7
Standardized data"
No. | ${{y}_{1}}$ | ${{y}_{2}}$ | ${{y}_{3}}$ | ${F}'$. |
---|---|---|---|---|
1 | 0 | 0 | 0 | 0.0000 |
2 | 0 | 0.25 | 0.25 | 0.0879 |
3 | 0 | 0.5 | 0.5 | 0.2609 |
4 | 0 | 0.75 | 0.75 | 0.4209 |
5 | 0 | 1 | 1 | 0.6283 |
6 | 0.25 | 0 | 0.25 | 0.0171 |
7 | 0.25 | 0.25 | 0.5 | 0.1298 |
8 | 0.25 | 0.5 | 0.75 | 0.2842 |
9 | 0.25 | 0.75 | 1 | 0.4557 |
10 | 0.25 | 1 | 0 | 0.6822 |
11 | 0.5 | 0 | 0.5 | 0.0579 |
12 | 0.5 | 0.25 | 0.75 | 0.1778 |
13 | 0.5 | 0.5 | 1 | 0.3060 |
14 | 0.5 | 0.75 | 0 | 0.4844 |
15 | 0.5 | 1 | 0.25 | 0.7923 |
16 | 0.75 | 0 | 0.75 | 0.0834 |
17 | 0.75 | 0.25 | 1 | 0.2006 |
18 | 0.75 | 0.5 | 0 | 0.3279 |
19 | 0.75 | 0.75 | 0.25 | 0.5459 |
20 | 0.75 | 1 | 0.5 | 0.8853 |
21 | 1 | 0 | 1 | 0.1585 |
22 | 1 | 0.25 | 0 | 0.2428 |
23 | 1 | 0.5 | 0.25 | 0.3725 |
24 | 1 | 0.75 | 0.5 | 0.6453 |
25 | 1 | 1 | 0.75 | 1.0000 |
[1] | P.B. Zhao and Y. Shi , “Robust Control of the A-Axis with Friction Variation and Parameters Uncertainty in Five-Axis CNC Machine Tools,” Archive Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science 1989-1996, Vol. 228, No. 14, pp. 2545-2556, September 2014 |
[2] |
P. B. Zhao, Y. Shi, J. Huang , “Proportional-Integral based Fuzzy Sliding Mode Control of the MillingHead,” Control Engineering Practice, Vol.3, No. 5, pp.1-13, August 2016
doi: 10.1016/j.conengprac.2016.04.012 |
[3] |
T. Thepsonthi and T. Özel ,“Multi-Objective Process Optimization for Micro-End Milling of Ti-6Al-4V Titanium Alloy,” International Journal of Advanced Manufacturing Technology,Vol.63, No. 12, pp. 903-914, December 2012
doi: 10.1007/s00170-012-3980-z |
[4] |
P.A. Dearnleyand A. N. Grearson , “Evaluation of Principal Wear Mechanisms of Cemented Carbides and Ceramics used for Machining Titanium Alloy IMI 318,” Metal Science Journal, Vol. 2, No. 1, pp. 47-58, July 2013
doi: 10.1179/mst.1986.2.1.47 |
[5] | J. Ren, J. Zhou, J. Zeng , “Analysis and Optimization of Cutter Geometric Parameters for Surface Integrity in Milling Titanium Alloy Using a Modified Grey-Taguchi Method,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 230, No. 11, pp. 2114-2128, September 2015 |
[6] |
S.A. Abbasi and P. Feng , “Evaluating the Effect of PCD and TiAIN Coated Carbide End Mill’s Rake Angle on Machinability of Titanium Alloy TÃ-6AI-4V,” Advanced Materials Research, Vol. 1025-1026, pp. 564, September 2014
doi: 10.4028/www.scientific.net/AMR.1025-1026.564 |
[7] |
R. A. R. Rashid, S. Palanisamy, S. Sun, and M. S. Dargusch , “Tool Wear Mechanisms Involved in Crater Formation on Uncoated Carbide Tool When Machining Ti6al4v Allo,” International Journal of Advanced Manufacturing Technology, Vol. 83, No. 9, pp. 1457-1465, April 2016
doi: 10.1007/s00170-015-7668-z |
[8] |
M.A. Vazquez-Cruz, R. Guzman-Cruz, I.L. Lopez-Cruz,O. Cornejo-Perez, I. Torres-Pacheco,and R. G. Guevara-Gonzalez , “Global Sensitivity Analysis by Means ofEfast and Sobol’Methods and Calibration of Reduced State-variable Tomgro Model Using Genetic Algorithms,” Computers and Electronics in Agriculture,Vol. 100, pp. 1-12, January 2014
doi: 10.1016/j.compag.2013.10.006 |
[9] |
E. Castillo, A. S. Hadi, A. Conejo, and A. Fernández-Canteli , “A General Method for Local Sensitivity Analysis with Application to Regression Models and Other Optimization Problems,” Technometrics, Vol. 46, No. 4, pp. 430-444,November 2004
doi: 10.1198/004017004000000509 |
[10] |
A. Saltelli and S. Tarantola ,“A Quantitative Model-Independent Method for Global Sensitivity Analysis of Model Output,” Technometrics, Vol. 41, No. 1, pp. 39-56, 1999
doi: 10.1080/00401706.1999.10485594 |
[11] |
B. Sudret , “Global Sensitivity Analysis Using Polynomial Chaos Expansions,” Reliability Engineering and System Safety, Vol. 93, No. 7, pp. 964-979, July 2008
doi: 10.1016/j.ress.2007.04.002 |
[12] |
G.Li, H. Rabitz, P. E. Yelvington, O. O. Oluwole, F. Bacon, C. E. Kolb , “Global Sensitivity Analysis for Systems with Independent and/orCorrelated Inputs,” Journal of Physical Chemistry, Vol. 2, No. 6, pp. 7587-7589, May 2010
doi: 10.1016/j.sbspro.2010.05.131 pmid: 20420436 |
[13] |
V. Tahmasbi, M. Ghoreishi, M. Zolfaghari , “Sensitivity Analysis of Temperature and Force in Robotic Bone Drilling Process Using Sobol Statistical Method,” Biotechnology and Biotechnological Equipment, Vol. 9, pp. 1-12, November 2017
doi: 10.1080/13102818.2017.1403863 |
[14] | G.Verbeke, G. Molenberghs, H. Thijs, E. Lesaffre, M. G. Kenward , “Sensitivity Analysis for Nonrandom Dropout: A Local Influence Approach,” Biometrics, Vol. 57, No. 1, pp. 1-7, March 2001 |
[15] |
C.Z. Li and S. Mahadevan , “An Efficient Modularized Sample-based Method to Estimate the First-Order Sobol’ Index,” Reliability Engineering and System Safety, Vol. 153, pp. 110-121, September 2016
doi: 10.1016/j.ress.2016.04.012 |
[16] |
F. Pianosi, K. Beven, J. E.Freer, J. W.Hall, J. Rougier, D. B.Stephenson , et al., “Sensitivity Analysis of Environmental Models:A Systematic Review with Practical Workflow,” Environmental Modelling and Software, Vol.79, No. C, pp. 214-232, May 2016
doi: 10.1016/j.envsoft.2016.02.008 |
[17] |
R. Rosolem, H. V. Gupta, W. J. Shuttleworth, X. Zeng , “A Fully Multiple‐Criteria Implementation of the Sobol’Method for Parameter Sensitivity Analysis,” Journal of Geophysical Research Atmospheres, Vol. 117, No. D7, pp. 287-298, April 2015
doi: 10.1029/2011JD016355 |
[18] | M. J. Anderson and P. J. Whitcomb. , “ RsmSimplified: Optimizing Processes Using Response Surface Methods for Design of Experiments Second Edition,”Crc Press, 2016 |
[19] |
T. Yu, Y. Shi, X. He, C. Kang, B. Deng, S. Song , “Optimization of Parameter Ranges for Composite Tape Winding Process based on Sensitivity Analysis,” Applied Composite Materials, Vol. 59, No. 2, pp. 1-16, August 2016
doi: 10.1007/s10443-016-9553-9 |
[20] |
B. Zhou, L. Wang, Y. Liu, Y. Hu, , “Analysis of Factor Sensitivity in Brake Friction and Wear Performance based on the Sobol Method,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 40, No. 7, pp. 345,July 2018
doi: 10.1007/s40430-018-1269-3 |
[1] | Weihua Wei, Haipeng Yu, Hongwei Zhu and Yaning Cai. Optimal Design and Force Analysis for Key Components of Vertical Roller Mill [J]. Int J Performability Eng, 2020, 16(11): 1698-1707. |
|