1 |
P. Y. Wang, H. F. Lu, H. E. Cheng, “Dsmc Simulation of Plume Backflow from Bipropellant Attitude Control Engine”, Journal of Engineering Thermophysics, Vol. 25, No. 4, pp.640-642, 2004
doi: 10.1023/B:JOGO.0000006653.60256.f6
|
2 |
J. Li, L. Yin, L. Yan, “Two-Way Coupled Model for Rarefied Multiphase Flow”, Journal of National University of Defense Technology, Vol. 31, No. 3, pp.6-10, 2009
doi: 10.1007/978-0-387-74660-9_12
|
3 |
Z. Y. Tang, B. J. He, G. B. Cai, “Investigation on Boundary Conditions in Decoupled N-S/DSMC Method for Vaccum Plume Simulation of Thrusters”, Journal of Propulsion Technology, Vol. 35, No. 7, pp.897-904, 2014
|
4 |
Z. H. Li, H. Z. Zhong, A. P. Peng, J. L. Wu, “A Numerical Method for Simulation Rarefied Two Phase Flow”, Acta Aerodynamica Sinica, Vol. 33, No. 2, pp.266-271, 2015
|
5 |
Y. F. Ding, Y. Zhao, P. Y. Wang, “Simulation of High Altitude Solid Rocket Plume based on DSMC Method”, Aerospace Shanghai, Vol. 34, No. 5, pp.110-116, 2017
|
6 |
S. K. Dong, Y.Shuai, H. P. Tan, L. H. Liu, “Computation of Radiative Heat Transfer in Participating Media using Backward Monte Carlo Method”, Journal of Harbin Institute of Technology, Vol. 36, No. 12, pp.1602-1604, 2004
|
7 |
X. Q. Qi, P. Y. Wang, J. Z. Zhang, Y. Shan, H. E. Cheng, “Reverse Monte Carb Simulation on Infrared of Lobed Nozzle Mixer Plume”, Journal of Shanghai Jiaotong University, Vol. 39, No. 8, pp.1229-1232, 2005
|
8 |
F. Yang, P. Y. Wang, Y. Y. Bao, P. Li, “Numerical Simulation on Secondary Launcher Exhaust Plume Base Heating,”Aerospace Shanghai, No. 5, pp.56-51, 2009
|
9 |
J. Y. Li, S. K. Dong, H. P. Tan, “Influences of Phase Transition and Carbon Soot Impurity on the Radiative Properties of Alumina Particle Flow”, Journal of Solid Rocket Technology, Vol. 35, No. 4, pp.485-489, 2012
|
10 |
P. J. Sun, D. B. Wang, F. Yang, Y. R. Zhou, Y. Y. Bao, W. D. Zhang, et al., “Numerical Simulation and Flight Test Validation of a Launch Vehicle Altitude Engine Exhaust Plume Base Heating”, Aerospace Shanghai, Vol. 33, No. S1, pp.23-28, 2016
|
11 |
I. D. Boyd, P. F. Penko, D. L.Meissner, “Numerical and Experimental Investigations of Rarefied Nozzle and Plume Flows of Nitrogen,”in Proceedings of the 26 th Thermophysics Conference, pp.91-1363, 1991
doi: 10.2514/6.1991-1363
|
12 |
I. D. Boyd, P. F. Penko, D. L. Meissner, K. J. DeWitt,“Experimental and Numerical Investigations of Low-Density Nozzle and Plume Flows of Nitrogen,” AIAA Journal, Vol. 30, No. 10, pp.2453-2460, 1992
doi: 10.2514/3.11247
|
13 |
O. Kramer, “Evaluation of Thermal Radiation from the TITAN III Solid Rocket Motor Exhaust Plumes,”in Proceedings of the 5th Thermophysics Conference,Los Angeles,California, pp.1-9, 1970
doi: 10.2514/6.1970-842
|
14 |
J. D. George and I. D. Boyd,“Simulation of Nozzle Plume Flows using a Combined CFD-DSMC Approach,” AIAA, pp.99-3454, 1999
doi: 10.2514/6.1999-3454
|
15 |
G. A. Bird, “Molecular Gas Dynamics and the Direct Simulation of Gas flows, ”Clarendon Press, 2003
|
16 |
O. Kramer, “TITAN III Convective Base Heating from Solid Rocket Motor Exhaust Plumes, ” inProceedings of AIAA/SAE 8th Joint Propulsion Specialist Conference, New Orleans,Louisiana,AIAA, pp.1-7, 1972
doi: 10.2514/6.1972-1169
|
17 |
T. F. Greenwood, “Development of Space Shuttle BaseHeating Methodology and Comparison with Flight Data,” in Proceedings of the JANNAF 13th Plume Technology Meeting,Chemical Propulsion Information Agency, CPIA-357, Vol.1, pp.67-82, Houston, Texas, April 1982
|
18 |
T. F. Greenwood, Y. C. Lee, R. L. Bender, R. E Carter, “Space Shuttle Base Heating”, Journal of Apacecraft and Rockets, Vol. 21, No. 4, pp.339-345, 1984
|
19 |
T. F. Greenwood, D. C. Seymour, R. L. Bender, “BaseHeating Prediction Methodology used for the Space shuttle,” in Proceedings of the JANNAF 10th Plume Technology Meeting,Chemical Propulsion Information Agency, CPIA-291, Vol.2, pp.253-312, SanDiego, California, December 1977
|