[1] K. Timothée, “Modélisation de la Propagation Des Fautes Dans Les Systèmes de Production,” Thèse de Doctorat en Automatique Industrielle, Ecole Nationale Supérieure Polytechnique de Yaoundé, 30 Juin 2011 [2] M. Bouziane, “Introduction du «Taux de Rendement Synthétique» (TRS) Parmi Les Indicateurs de Développement Durable,” in Proceedings of Approche Technico-économique Pour Une Entreprise Durable, International Conférence on Energie and Sustainable Development, Novembre 2011 [3] G. Habchi, “Modélisation Pour la Simulation D'un Système D'aide au Pilotage Industriel,” Synthèse en Vue de L'habilitation à Diriger Des Recherches, Université de Savoie, 5 Décembre, 2011 [4] A. Bounit and Y. Targhalline, “La Mise en Place D'un Modèle de Mesure de la Performance de L'usine BAHIA,” Projet de Fin D'etudes en Génie Industriel, Ecole Nationale des Sciences Appliquées de Marrakech, Juin 2012 [5] E. Irhirane, A. Bounit,B. Dakkak, “Estimate of OEE (Overall Equipment Effectiveness) Objective from Classical OEE,” International Journal of Performability Engineering, Vol. 13, No. 2, pp. 135-142, 2017 [6] A. Bounit, E. Irhirane, N. Bourquia,R. Benmoussa, “Design of a Fuzzy Model that Integrates Hygiene, Safety, and Environment Systems for the Assessment of the Overall Risk of Machines,” Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, Vol. 230, No. 4, pp. 378-390, 2016 [7] Z. Yijun, “Contribution à L'évaluation et à la Modélisation du Bien-être Des Matériaux Textiles Habillement Par L'utilisation Des Techniques de Calcul Avancé,” Thèse de Doctorat en Automatique, Génie Informatique, Traitement du Signal et Des Images, Université de Lile, Décembre 2010 [8] L. A. Zadeh, “Fuzzy sets,” Information and Control, Vol. 8, No. 3, pp. 338-353, 1965 [9] E. Irhirane, A. Bounit, B. Dakkak, R. Benmoussa,N. Bourquia, “New Approach Integrating the Health, Safety, and Environment Systems for the Maintenance Function in Industries,”Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2018 [10] P. Ponce-Cruz and F. D. Ramirez-Figueroa, “Intelligent Control Systems with LabVIEW™ 9,” Springer, 2010 [11] O. Y.Abul-Haggag and W. Barakat, “Application of Fuzzy Logic for Risk Assessment using Risk Matrix,”International Journal of Emerging Technology and Advanced Engineering, pp. 49-53, 2013 [12] M. Anis, “Contribution à la Gestion des Perturbations dans les Systèmes Manufacturiers à Contraintes de Temps,” Thèse de Doctorat en Automatique et Informatique Industrielle, Ecole Nationale D'ingénieurs de Tunis, Juillet 2010 |