Analysis of Meshing Performance and Fatigue Reliability of Main Reducer Transmission Device for Rail Conveyor

doi:10.23940/ijpe.19.07.p15.18861894

Int J Performability Eng ›› 2019, Vol. 15 ›› Issue (7): 1886-1894.doi: 10.23940/ijpe.19.07.p15.18861894

Previous Articles Next Articles

Analysis of Meshing Performance and Fatigue Reliability of Main Reducer Transmission Device for Rail Conveyor

Wenzhi Liu, Tianxiang Wang^*, and Jian Tao

Institute of Mechanical Engineering, Inner Mongolia University of Technology, Hohhot, 010051, China

Submitted on ;
Contact: * E-mail address: 1298133361@qq.com
Supported by:
This work is supported by the Key Scientific Research Project of the Inner Mongolia Autonomous Region University (No. NJZZ18075), the Natural Science Fund of the Inner Mongolia Autonomous Region (No. 2018MS05060), and the Talent Development Fund of the Inner Mongolia Autonomous Region.

Abstract

Abstract: Aiming at the reduction gear transmission of a rail conveyor, the two-stage main gear transmission system is taken as an example to establish the contact collision dynamics calculation model of the meshing gear teeth. The contact force of each gear speed and the tooth flanks of a gear with different helix angles in one motion cycle are calculated and analyzed. Based on the kinetic calculation results, the finite element calculation model of gear transmission friction contact is established. The Lagrangian multiplier method is used to calculate and analyze the meshing performance of the teeth under different helix angle contact conditions during one motion cycle. In order to avoid the contact fatigue of the gear teeth, the dangerous position of the tooth surface contact fatigue is obtained by finite element calculation. Based on the miner linear cumulative damage theory, the contact fatigue damage degree of the tooth surface of the tooth is obtained under different helix angle contact conditions.

Key words: gear reducer, dynamic analysis, contact stress, fatigue damage

Wenzhi Liu, Tianxiang Wang, and Jian Tao. Analysis of Meshing Performance and Fatigue Reliability of Main Reducer Transmission Device for Rail Conveyor [J]. Int J Performability Eng, 2019, 15(7): 1886-1894.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

References

[1] Y. N. Wang, Z. G. Zhang,Y. Z. Lin, “Display Dynamics Simulation Research on Integrated Structure System of Multistage Cylindrical Gear Reducer,” Mechanics and Electronics, Vol. 36, No. 6, pp. 13-16, 2018
[2] L. Zhang, “Analysis of Abnormal Vibration Characteristics of Gear Reducer,” Journal of Huaibei Vocational and Technical College, Vol. 17, No. 3, pp. 104-106, 2018
[3] J. Y. Li, Z. J. Gou,Y. Li, “Dynamic Simulation of Gear Meshing Process based on ADAMS,”Design and Research, pp. 15-18, 2018
[4] Y. Huang, “Application of Cumulative Impulse Detection Algorithms for Gearbox in Wind Generator,”Shanghai Electric Technology, pp. 18-22, 2018
[5] Z. H. Huang, X. J. Zhang,Y. J. Zhou, “Meshing Impact Force Simulation of Involute Gears,”Journal of Zhongnan University, pp. 379-383, 2011
[6] A. M. Liu, Y. Z. Han,L. Q. Wang, “Dynamic Simulation of Gear Reducer based on Pro/E and ADAMS,”Coal Mine Machinery, pp. 47-49, 2011
[7] Y. M. Mou, Z. D. Fang,X. J. Zhang, “Design and Analysis of High-Order Transmission Error of High Coincidence Arc Gear,” Journal of Huazhong University of Science and Technology, Vol. 46, No. 7, pp. 67-72, 2018
[8] L. H. Chang, G. Liu,Z. X. He, “Study on the Variation Law of Static Transmission Error of Cylindrical Gear Pair,” Mechanical Transmission, Vol. 41, No.7, pp. 2-11+21, 2017
[9] Z. H. Fan, X. Y. Zhao,H. W. Yan, “Contact finite Element Analysis of Helical Gears based on ANSYS,”Mechanical Transmission, pp. 68-70, 2010
[10] H. P. Li, L. M. Wang, G. Chen,Y. Dong, “Dynamic Meshing Characteristics Analysis of Differential Gears based on Finite Element Method,” Journal of Jiangsu University, Vol. 38, No. 6, pp. 627-631, 2017
[11] L. Y. Wei, C. L. Wang, L. Y. Zhang, X. M. Liu, X. T. Qiao,R. F. Wang, “Finite Element Analysis of Meshing Stiffness of Harmonic Gears,” Mechanical Transmission, Vol. 42, No. 6, pp. 144-150, 2018
[12] W. Liu, J. B. Cai, C. B. Ding,X. W. Wang, “Contact Stress Analysis and Profile Modification of High Frequency Crusher Gears,” Modular Machine Tools and Automatic Processing Technology, pp. 60-64, 2017
[13] B. He, S. Huang,X. L. He, “Numerical Simulation of Gear Surface Hardening using the Finite Element Method,” The International Journal of Advanced Manufacturing Technology, Vol. 74, No.5-8, pp. 665-672, 2014
[14] S. S. Patil, S. Karuppanan, I. Atanasovska,A. A. Wahab, “Contact Stress Analysis of Helical Gear Pairs, Including Frictional Coefficients,”International Journal of Mechanical Sciences, pp. 205-211, 2014
[15] M. Behzad, M. Alvandi, D. Mba,J. Jamali, “A Finite Element-based Algorithm for Rubbing Induced Vibration Prediction in Rotors,” Journal of Sound and Vibration, Vol. 332, No. 21, pp. 5523-5542, 2013
[16] L. G.Pu and G. D. Chen, “Mechanical Design,” Higher Education Press, Beijing, 2013
[17] Y. F.Gong and F. Jia, “Fatigue Reliability of a Steel Structure Crane Beam based on nCode Design-Life,” Liaoning University of Engineering and Technology, Vol. 37, No. 2, pp. 371-375, 2018
[18] K. Tian, P. Wang, X. Q. Han, W. Q. Qin,W. Liang, “Reliability Analysis of Subsynchronous Oscillation of Power System on Fatigue Damage of Wind Turbine Shaft System,” Acta Energia Sinica, Vol. 38, No. 3, pp. 586-592, 2017

Analysis of Meshing Performance and Fatigue Reliability of Main Reducer Transmission Device for Rail Conveyor

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 3

Recommended 0

[1]	Lele Wang, Binqiang Wang, Jiangang Liu, Qiguang Miao, and Jianhui Zhang. Cuckoo-based Malware Dynamic Analysis [J]. Int J Performability Eng, 2019, 15(3): 772-781.
[2]	Risu Na, Jie Liu, and Haitang Cen. Random Dynamic Analysis of Ring Die Pellet Mill [J]. Int J Performability Eng, 2019, 15(2): 362-373.
[3]	Yanliang Wang, Junfang Xue, Xiufen Zhang, and Lichun Chen. Finite Element Analysis and Evaluation of Bogie Frame for Passenger Locomotive based on Reliability [J]. Int J Performability Eng, 2019, 15(1): 146-155.