1 |
K. H. Jens, B. H. Ulrik, E. H. Johan, et al., “Optimization of a Multiparameter Model for Biomass Pelletization to Investigate Temperature Dependence and to Facilitate Fast Testing on Pelletization Behaviour”, Energy & Fuels, Vol. 25, No. 8, pp.3701-3711, 2011
|
2 |
K. H. Jens, B. M. Ulrik, W. Kim, et al., “Experimental Verification of Novel Pellet Model using a Single Pelleter Unit”, Energy & Fuels, Vol. 21, No. 4, pp.2446-2449, 2007
doi: 10.1021/ef070156l
|
3 |
J. M. Castellano, M. Gómez, M. Fernández, L. S. Esteban, J. E. Carrasco, “Study on the Effects of Raw Materials Composition and Pelletization Conditions on the Quality and Properties of Pellets Obtained from Different Woody and Non Woody Biomasses,”Fuel, Vol. 139, pp.629-636, 2015
|
4 |
W. Stelte, J. K. Holm, A. R. Sanadi, S. Barsberg, J. Ahrenfeldt, U. B. Henriksen, “Fuel Pellets from Biomass: The Importance of the Pelletizing Pressure and Its Dependency on the Processing Conditions”, Fuel, Vol. 90, No. 11, pp.3285-3290, 2011
|
5 |
K. Wu, Y. Sun, B. B. Peng, “Modeling and Experiment on Rotary Extrusion Torque in Ring-Die Pelleting Process,” Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), Vol. 29, No. 24, pp.33-38, 2013
doi: 10.3969/j.issn.1002-6819.2013.24.005
|
6 |
J. F. Shen, K. Wu, X. A. Cui, “Vibration Analysis and Structural Optimization of a Ring Die Pellet Mill with Rotor Eccentricity,” Journal of Vibration and Shock, Vol. 35,No. 24, pp.59-65, 2016
|
7 |
F. Correaméndez, A. Carrilloparra, J. G. Rutiagaquiñones, F. Marquez-Montesino, H. Gonzalez-Rodriguez, E. J. Ybarra, et al., “Granulometric Distribution in Timber by-Products for Potential Use in Pellets and Briquettes,”Revista Mexicana De Ciencias Forestales, Vol. 5, No. 53, pp. 53-63, 2014
|
8 |
W. Stelte, J. K. Holm, A. R. Sanadi, S. Barsberg, J. Ahrenfeldt, et al., “A Study of Bonding and Failure Mechanisms in Fuel Pellets from Different Biomass Resources,”Biomass Bioenergy, Vol. 35, pp.910-918, 2010
|
9 |
W. Stelte, A. R. Sanadi, L. Shang, J. K. Holm, et al., “Recent Developments in Biomass Pelletization-A Review,”Bio-Resources, Vol. 7, pp.4451-4490, 2012
|
10 |
K. Wu, S. J. Shi, Y. Sun, et al., “Modeling Andanalysis on Extruding Force in Pelleting Process”, Transactions of the Chinese Society of Agricultural Engineering, Vol. 26, No. 12, pp.142-147, 2010
doi: 10.3969/j.issn.1002-6819.2010.12.024
|
11 |
J. F. Wu, J. L. Huang, W. G. Zhang, “Simulated Experiment and Model of Pelletizing Density and Extruding Force for Alfalfa Powder,” Transactions of the Chinese Society for Agricultural Machinery, Vol. 38,No. 1, pp.68-71, 2007
|
12 |
A.M. Yu and Y. Hao, “Free Vibration Analysis of Cylindrical Helical Springs with Noncircular Cross-Sections,” Journal of Sound & Vibration, Vol. 330, No. 11, pp.2628-2639, 2011
doi: 10.1016/j.jsv.2010.12.015
|
13 |
R. J. Elliott, T. K. Siu, E. S. Fung, “Filtering a Nonlinear Stochastic Volatility Model”, Nonlinear Dynamics, Vol. 67, No. 2, pp.1295-1313, 2012
doi: 10.1007/s11071-011-0069-4
|
14 |
J. L. Shi, X. G. Ma, C. L. Xu, S. J. Zang, “Meshing Stiffness Analysis of Gear using the Ishikawa Method”, Applied Mechanics & Materials, Vol. 401, No. 4, pp.203-206, 2013
|
15 |
L. Katafygiotisand S. H. Cheung, “Wedge Simulation Method for Calculating the Reliability of Linear Dynamical Systems,”Probabilistic Engineering Mechanics, Vol. 19, pp. 229-238, 2004
doi: 10.1016/j.probengmech.2004.02.006
|