Two-Dimensional Product Warranty Cost Model under Preventive Maintenance Time Constraints

doi:10.23940/ijpe.19.04.p18.12271234

Int J Performability Eng ›› 2019, Vol. 15 ›› Issue (4): 1227-1234.doi: 10.23940/ijpe.19.04.p18.12271234

Previous Articles Next Articles

Two-Dimensional Product Warranty Cost Model under Preventive Maintenance Time Constraints

Qian Wang^{a, b}, Zhonghua Cheng^{a, *}, Zhiyong Li^c, and Yongsheng Bai^a

a Department of Equipment Command and Administration, Shijiazhuang Campus of Army Engineering University, Shijiazhuang, 050000, China;
b Ninth Comprehensive Training Base of Army, Zhangjiakou, 075000, China;
c Teaching and Researching Department, Shijiazhuang Campus of Army Engineering University, Shijiazhuang, 050000, China

Revised on ; Accepted on
Contact: E-mail address: bwrs69@sohu.com
About author:Qian Wang is a master's student at the Shijiazhuang Campus of Army Engineering University. His research interests include equipment support theory and technology. Zhonghua Cheng is a professor and doctoral supervisor at the Shijiazhuang Campus of Army Engineering University. His research interests include equipment support theory and technology. Zhiyong Li is a teacher at the Shijiazhuang Campus of Army Engineering University. His research interests include equipment support theory .Yongsheng Bai is a teacher at the Shijiazhuang Campus of Army Engineering University. His research interests include maintenance engineering.

Abstract

Abstract: Providing high-quality product warranty service is an important part of the current competition among manufacturers for customers. On the basis of current warranty service, providing reasonable warranty service to customers more closely and practically is a problem that manufacturers must consider. On the basis of existing literature and considering the actual situation of manufacturers and customers, the time constraints of preventive maintenance in warranty service are proposed for the first time. Under the incomplete preventive maintenance strategy, the time of preventive maintenance during the warranty period is limited, and a two-dimensional product maintenance cost model under the time constraint is established to determine how to carry out preventive maintenance to obtain the ideal maintenance cost. The validity of the model is verified by an example, providing a basis for product two-dimensional warranty service decision-making.

Key words: Time constraint, two-dimensional warranty, cost

Qian Wang, Zhonghua Cheng, Zhiyong Li, and Yongsheng Bai. Two-Dimensional Product Warranty Cost Model under Preventive Maintenance Time Constraints [J]. Int J Performability Eng, 2019, 15(4): 1227-1234.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

References

1 M. Park and H. Pham, “A New Warranty Policy with Failure Times and Warranty Servicing Times,” IEEE Transactions on Reliability, Vol. 61, No. 3, pp. 822-831, 2012
2 R. S. Ramniwas, M. Kadyan,J. Kumar, “Stochastic Modeling of a Single-Unit Repairable System with Preventive Maintenance under Warranty,” International Journal of Computer Applications, Vol. 75, No. 14, pp. 36-41, 2014
3 C. Su and X. Wang, “A Two-Stage Preventive Maintenance Optimization Model Incorporating Two-Dimensional Extended Warranty,”Reliability Engineering & System Safety, Vol. 155, pp. 169-178, 2016
4 Y. S.Huang and C. Yen, “A Study of Two-Dimensional Warranty Policies with Preventive Maintenance,” IIE Transactions, Vol. 41, No. 4, pp. 299-308, 2009
5 J. Wu, M. Xie,T. S.Adam Ng, “On a General Periodic Preventive Maintenance Policy Incorporating Warranty Contracts and System Ageing Losses,” International Journal of Production Economics, Vol. 129, No. 1, pp. 102-110, 2011
6 Y. S. Huang, W. Y. Gau,J. W. Ho, “Cost Analysis of Two-Dimensional Warranty for Products with Periodic Preventive Maintenance,”Reliability Engineering & System Safety, Vol. 134, pp. 51-58, 2015
7 N. Tao and S. Zhang, “The Optimal Extended Warranty Length of Durable Goods based Preventive Maintenance Behavior,” Systems Science & Control Engineering, Vol. 3, No. 1, pp. 1-14, 2015
8 A. Y.Alqahtani and S. M. Gupta, “Money-Back Guarantee Warranty Policy with Preventive Maintenance Strategy for Sensor-Embedded Remanufactured Products,”Journal of Industrial Engineering International, Vol. 14, pp. 767-782, 2018
9 G. L. Liao, “Optimum Maintenance Strategy of a Repairable System under Long-Term Free Preventive Maintenance Warranty with Predicted Maintenance,” International Journal of Reliability, Quality and Safety Engineering, Vol. 23, No, 4, pp. 17, 2016
10 J. Wang, Z. Zhou,H. Peng, “Flexible Decision Models for a Two-Dimensional Warranty Policy with Periodic Preventive Maintenance,”Reliability Engineering & System Safety, Vol. 162, pp. 14-27, 2017
11 Y. Wang, Y. Liu, Z. Liu,X. Li, “On Reliability Improvement Program for Second-Hand Products Sold with a Two-Dimensional Warranty,”Reliability Engineering & System Safety, Vol. 167, pp. 452-463, 2017
12 M. Shafiee, M. Finkelstein,M. J. Zuo, “Optimal Burn-in and Preventive Maintenance Warranty Strategies with Time-Dependent Maintenance Costs,” IIE Transactions, Vol. 45, No. 9, pp. 1024-1033, 2013
13 X. Zhou, Y. Li, L. Xi,J. Lee, “Multi-Phase Preventive Maintenance Policy for Leased Equipment,” International Journal of Production Research, Vol. 53, No. 15, pp. 4528-4537, 2014
14 Y. Wang, Z. Liu,Y. Liu, “Optimal Preventive Maintenance Strategy for Repairable Items under Two-Dimensional Warranty,”Reliability Engineering & System Safety, Vol. 142, pp. 326-333, 2015
15 M. Park, K. M. Jung,D. H. Park, “Optimal Maintenance Strategy under Renewable Warranty with Repair Time Threshold,”Applied Mathematical Modelling, Vol. 43, pp. 498-508, 2017
16 A. Nasrum, U.S. Pasaribu,H. Husniah, “Service Contract with Periodic Preventive Maintenance for a Dump Truck Sold with a Two-Dimensional Warranty,” in Proceedings of AIP Conference, 2016
17 C. Y. Cheng, X. F. Zhao,M. Chen, “A Failure-Rate-Reduction Periodic Preventive Maintenance Model with Delayed Initial Time in a Finite Time Period,” Quality Technology & Quantitative Management, Vol. 11, No. 3, pp. 245-254, 2014
18 Y. C. Han, X. S. Jia, Y. S. Bai,Y. T. Wu, “Optimization Research on Two-Dimensional Preventive Maintenance Intervals,” Journal of Donghua University, Vol. 33, No. 2, pp. 196-200, 2016
19 H. Husniah, U. S. Pasaribu,B. P. Iskandar, “A Servicing Strategy Involving Preventive Maintenance and Imperfect Repair for Two Dimensional Warranties,” inProceedings of CIE43, 2013
20 Y. S. Huang, “Two-Dimensional Warranty with Reliability-Based Preventive Maintenance,” IEEE Transactions on Reliability, Vol. 62, No. 4, pp. 898-907, 2013
21 Z. L. Lin, Y. S. Huang,C. C. Fang, “Non-Periodic Preventive Maintenance with Reliability Thresholds for Complex Repairable Systems,”Reliability Engineering & System Safety, Vol. 136, pp. 145-156, 2015
22 W. Y.Yun and K. M. Kang, “Imperfect Repair Policies under Two-Dimensional Warranty,” Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, Vol. 221, No. 4, pp. 239-247, 2007

[1]	Punj Lata Singh, Sharad Singh Malik, Bhanu Pratap Singh Gupta, Piyush Pahadia, and Rahul Sindhwani. Assessment and Performability of Green and Conventional Building: Time and Cost Analysis [J]. Int J Performability Eng, 2022, 18(6): 387-395.
[2]	Ruiqi Wang, Guangyu Chen, Na Liang, Zheng Huang. Preventive Maintenance Optimization Regarding Large-Scale Systems based on the Life-Cycle Cost [J]. Int J Performability Eng, 2021, 17(9): 766-778.
[3]	Yi-Hao Chiu, Yi-Kuei Lin, and Thi-Phuong Nguyen. Network Reliability of a Stochastic Online-Food Delivery System with Space and Time Constraints [J]. Int J Performability Eng, 2021, 17(5): 433-443.
[4]	Bouzouada Abdallah, Yssaad Benyssaad, Daoud Mohamed, Bekkouche Benaissa, and Yagoubi Benabdellah. Maintenance Optimization for Complex System using Evolutionary Algorithms under Reliability Constraints within the Context of the Reliability-Centered-Maintenance [J]. Int J Performability Eng, 2021, 17(1): 1-13.
[5]	Caiming Zhang, and Weina Fu. Optimal Model for Patrols of UAVs in Power Grid under Time Constraints [J]. Int J Performability Eng, 2021, 17(1): 103-113.
[6]	Xiaoxin Ding, Kai Liu, and Shujun Shi. Risk Assessment of Strategic Cost Management based on Grey Model for Prefabricated Buildings [J]. Int J Performability Eng, 2020, 16(9): 1478-1487.
[7]	Manish Rawat and Bhupesh Kumar Lad. Joint Optimization of Reliability Design and Level of Repair Analysis Considering Time Dependent Failure Rate of Fleet System [J]. Int J Performability Eng, 2020, 16(6): 821-833.
[8]	Eirik Bjorheim Abrahamsen, Jon Tømmerås Selvik, and Håkon Bjorheim Abrahamsen. Using Cost-Effectiveness Acceptability Curves as a Basis for Prioritizing Investments in Safety Measures in the Offshore Oil and Gas Industry [J]. Int J Performability Eng, 2020, 16(2): 163-170.
[9]	Eirik Bjorheim Abrahamsenab, Jon Tømmerås Selvik, Hans Petter Lohne, and Øystein Arild. Plug and Abandonment Decision-Making: Quality at the Right Price [J]. Int J Performability Eng, 2020, 16(1): 1-9.
[10]	Xinbo Qian, and Jian Huang. A Degradation Identification Method Combining Cost Matrix and Prediction Window Width for Mechanical Equipment [J]. Int J Performability Eng, 2019, 15(9): 2400-2406.
[11]	Chetna Choudhary, P. K. Kapur, Sunil K. Khatri, and A. K. Shrivastava. Effort-based Release and Patching Time of Software with Warranty using Change Point [J]. Int J Performability Eng, 2019, 15(6): 1724-1733.
[12]	Heyang Xu, Pengyue Cheng, Yang Liu, and Wei Wei. A Fault Tolerance Aware Virtual Machine Scheduling Algorithm in Cloud Computing [J]. Int J Performability Eng, 2019, 15(11): 2990-2997.
[13]	Zhenzhen Jin, Qinghe Yuan, Yingqian Sun, Shun Jia, and Zhaojun Li. Optimization of Mine Down-Hole Equipment Maintenance Strategy based on Fault Data [J]. Int J Performability Eng, 2019, 15(10): 2597-2607.
[14]	Xiao Zhao, Jianhua Yang, and Xin Shi. Multi-Criteria Decision Model for Imperfect Maintenance using Multi-Attribute Utility Theory [J]. Int J Performability Eng, 2018, 14(12): 3014-3024.

Two-Dimensional Product Warranty Cost Model under Preventive Maintenance Time Constraints

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 14

Recommended 0