1. Hendershot, J.R. and Miller, T.J.E. Design of brushless permanent-magnet motors. Magna Physics. 1994. 2. Chawrasia, S. K. Das, A., Chanda, C. K. and Banerjee, S. Design, analysis and comparative study of hub motor for an electric bike, Michael Faraday IET International Summit 2020 (MFIIS 2020), pp. 242-247, 2020, doi: 10.1049/icp.2021.1179. 3 3. Prasun, M., Suman, S., and Ikkurti, H. P. A methodology for selection of optimum power rating of propulsion motor of three-wheeled electric vehicle on indian drive cycle (IDC), In International Journal on Theoretical and Applied Research in Mechanical Engineering [IJTARME], vol. 2, issue 1, pp. 1, 2013. 4. Immanuel A., Thilagar S. H., Singh F. B.Design of solar powered BLDC motor-driven electric vehicle, In International Journal of Renewable Energy Research, vol. 2, no. 3, 2012. 5. Saeed M. K., Saheb K., Ramin B. S., Mehran S., A micro-scale wind turbine fed BLDC motor for electric vehicle drive application, In International Journal of Renewable Energy Research, vol 4, no. 1, 2014. 6. Nof, S.Y., Wilhelm, W. and Warnecke, H.Industrial assembly. Springer Science & Business Media, 1997. 7. Shukla, A. and Payami, S.Design and thermal network modeling of BLDC motor for submersible pump application,2020 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), pp. 1-5, 2020, doi: 10.1109/PEDES49360.2020.9379473. 8. Liu, C., Chau, K. T. and Jiang, J. Z.A Permanent-magnet hybrid in-wheel motor drive for electric vehicles, IEEE Vehicle Power and Propulsion Conference (VPPC), Harbin, China, September 3-5, 2008. 9. Tikadar A., Kumar N., Joshi. Y., andKumar, S. Coupled electro-thermal analysis of permanent magnet synchronous motor for electric vehicles.2020 19th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), pp. 249-256, 2020. doi: 10.1109/ITherm45881.2020.9190562. 10. Marashi, A. N., Kanzi, K.Thermal analysis of BLDC motor with propose new arrangement for permanent magnets to magnet eddy current loss reduction,IEEE Iranian Conference in Electrical Engineering(ICEE). 2016 11. Chawrasia, S. K., Das, A. and Chanda, C. K.Design and analysis of electric bike hub-motor using motor-CAD.2020 3rd International Conference on Energy, Power and Environment: Towards Clean Energy Technologies, pp. 1-6, 2021, doi: 10.1109/ICEPE50861.2021.9404475. 12. Chawrasia S. K.,Kumar C. C., and Banerjee, S. Design and analysis of an in-wheel motor for an electric vehicle, 2020 IEEE Calcutta Conference (CALCON), Kolkata, India, pp. 351-355, 2020, DOI: 10.1109/ CALCON49167. 2020. 9106538. 13. Zhang W., Yu Z., Chen X., andHuang Q.The Magneto-thermal analysis of a high torque density joint motor for humanoid robots.2018 IEEE-RAS 18th International Conference on Humanoid Robots (Humanoids), pp. 112-117, 2018, doi: 10.1109/HUMANOIDS.2018.8624930. 14. Kwon H. S., Yeo H. K., & Jung, H. K. Influence of a novel flux‐absorbing structure on the performance of a surface‐mounted permanent‐magnet motor with overhang. IET Electric Power Applications, vol. 13, no. 12, pp. 2096-2102, 2019. 15. Wenjuan Q., Jiming Z., Guiqing H., Jibin Z., andYongxiang X.Thermal analysis of underwater oil-filled BLDC motor. In2011 International Conference on Electrical Machines and Systems, IEEE, pp. 1-4, 2011. 16 16. Hwang, H. Y., Chung, T. U., Lee, D. Y., Hwang, P., and Shim, J. S. The heat transfer analysis of 1.2 [kW] BLDC motor on the condition of the external flow. Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, vol. 26, no. 2, pp. 27-33, 2012. 17. Papa, G.,Koroušić-Seljak, B. An artificial intelligence approach to the efficiency improvement of a universal motor. Engineering applications of artificial intelligence, vol. 18, no. 1, pp. 47-55, 2005. 18. Hwang, S.W., Chin, J.W. and Lim, M.S.Design process and verification of SPMSM for a wearable robot considering thermal characteristics through LPTN. IEEE/ASME Transactions on Mechatronics, vol. 26, no. 2, pp. 1033-1042, 2020. 19. Mujianto A., Nizam M., andInayati, Comparation of the slotless brushless DC motor (BLDC) and slotted BLDC using 2D modeling.2014 International Conference on Electrical Engineering and Computer Science (ICEECS), pp. 212-214, 2014. doi: 10.1109/ICEECS.2014.7045248. 20. Leitner S., Kulterer T., Gruebler H. and Muetze A.Characterization of the Thermal Performances of Low-Cost Sub-Fractional Horsepower BLDC Claw-Pole Motor Designs.2020 IEEE Energy Conversion Congress and Exposition (ECCE), pp. 4269-4275, 2020. doi: 10.1109/ECCE44975.2020.9236284. |