Int J Performability Eng ›› 2018, Vol. 14 ›› Issue (11): 2711-2722.doi: 10.23940/ijpe.18.11.p17.27112722
Previous Articles Next Articles
Zhiyuan Yanga, *, Jianmin Zhaoa, Chiming Guoa, and Liying Lib
Submitted on
;
Contact:
* E-mail address: yzy_sjz90@126.com
About author:
Zhiyuan Yang is a Ph.D. student at Army Engineering University, Shijiazhuang, China. His current areas of research include degradation modeling and maintenance decision.Jianmin Zhao is a professor at Army Engineering University, Shijiazhuang, China. He received his Ph.D. degree from the University of Birmingham, Birmingham, UK. His areas of interest include PHM and maintenance decision.Chiming Guo is a lecturer at Army Engineering University, Shijiazhuang, China. He received his Ph.D. degree from the National University of Defense Technology, Changsha, China. His areas of interest include reliability engineering and maintenance engineering.Liying Li is a lecturer at Hebei University of Science and Technology, Shijiazhuang, China. She received her Master's degree from Shijiazhuang Tiedao University, Shijiazhuang, China. Her areas of interest include probability analysis and stochastic simulation.
Zhiyuan Yang, Jianmin Zhao, Chiming Guo, and Liying Li. Degradation and Reliability Modeling of Two-Component System with Degradation Rate Interaction [J]. Int J Performability Eng, 2018, 14(11): 2711-2722.
Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks
[1] R. Dekker, R. E. Wildeman,F. A. V. D. D. Schouten, “A Review of Multi-Component Maintenance Models with Economic Dependence,” [2] Y. Sun, L. Ma,J. Mathew, “Failure Analysis of Engineering Systems with Preventive Maintenance and Failure Interactions,” [3] Y. Sun, L. Ma, J. Mathew, W. Wang,S. Zhang, “Mechanical Systems Hazard Estimation Using Condition Monitoring,” [4] D. Bhattacharya and F. J. Samaniego, “Estimating Component Characteristics from System Failure-Time Data,” [5] R. I.Zequeira and C. Berenguer, “On the Inspection Policy of a Two-Component Parallel System with Failure Interaction,” [6] A. Barros, C. Berenguer,A. Grall, “A Maintenance Policy for Two-Unit Parallel Systems based on Imperfect Monitoring Information,” [7] Y. Sun, L. Ma, J. Mathew,S. Zhang, “An Analytical Model for Interactive Failures,” [8] H. R.Golmakani and H. Moakedi, “Periodic Inspection Optimization Model for a Two-Component Repairable System with Failure Interaction,” [9] J. K. Sari, M. J. Newby, A. C. Brombacher,L. C. Tang, “Bivariate Constant Stress Degradation Model: LED Lighting System Reliability Estimation with Two-Stage Modeling,” [10] Z. Pan and N. Balakrishnan, “Reliability Modeling of Degradation of Products with Multiple Performance Characteristics based on Gamma Processes,” [11] Y. Wang and H. Pham, “Modeling the Dependent Competing Risks with Multiple Degradation Processes and Random Shock Using Time-Varying Copulas,” [12] Z. Pan, N. Balakrishnan, S. Quan,J. Zhou, “Bivariate Degradation Analysis of Products based on Wiener Processes and Copulas,” [13] H. P. Hong, W. Zhou, S. Zhang,W. Ye, “Optimal Condition-based Maintenance Decisions for Systems with Dependent Stochastic Degradation of Components,” [14] H. Li, E. Deloux,L. Dieulle, “A Condition-based Maintenance Policy for Multicomponent Systems with Lévy Copulas Dependence,” [15] L. Bian and N. Gebraeel, “Stochastic Modeling and Real-Time Prognostics for Multi-Component Systems with Degradation Rate Interactions,” [16] N. Rasmekomen and A. K. Parlikad, “Condition-based Maintenance of Multi-Component Systems with Degradation State-Rate Interactions,” [17] A. F. Shahraki, O. P. Yadav,H. Liao, “A Review on Degradation Modelling and Its Engineering Applications,” [18] I. Ntzoufras, “Bayesian Modeling Using WinBUGS,” John Wiley and Sons, Hoboken, NJ, 2009 [19] X. Si, W. Wang, C. Hu, D. Zhou,M. G. Pecht, “Remaining Useful Life Estimation based on a Nonlinear Diffusion Degradation Process,” [20] C. T.Barker and M. J. Newby, “Optimal Non-Periodic Inspection for a Multivariate Degradation Model,” [21] X. Wang, N. Balakrishnan,B. Guo, “Residual Life Estimation based on a Generalized Wiener Degradation Process,” [22] W. Q.Meeker and L. A. Escobar, “Statistical Method for Reliability Data,” John Wiley and Sons, New York, 1998 [23] X. Wang, B. Guo,Z. Cheng, “Residual Life Estimation based on Bivariate Wiener Degradation Process with Time-Scale Transformation,” |
[1] | Wei Meng, Bo Zeng, Shuliang Li, and Syed Ahsan Ali Shah. A ReliabA Reliability Prediction Method of Novel Grey Model and its Error Analysisility Prediction Method of Novel Grey Model and [J]. Int J Performability Eng, 2019, 15(9): 2373-2381. |
[2] | Ting Zeng. Reliability Analysis of Cold Standby Systems based on Supplement Events using Multiple-Valued Decision Diagrams [J]. Int J Performability Eng, 2019, 15(8): 2062-2070. |
[3] | Manu Banga, Abhay Bansal, and Archana Singh. Proposed Hybrid Approach to Predict Software Fault Detection [J]. Int J Performability Eng, 2019, 15(8): 2049-2061. |
[4] | Murgayya S B, H N Suresh, Madhusudhan N, and Sarvanabavan B. Reliability based Maintenance Model to Assess the Condition of Rotor using XLrotor [J]. Int J Performability Eng, 2019, 15(8): 2019-2030. |
[5] | Yugang Zhang, Jingyi Liu, and Tianxiang Yu. Fastening Function Reliability Analysis of Aircraft Lock Mechanism based on Competitive Failure Method [J]. Int J Performability Eng, 2019, 15(7): 1920-1928. |
[6] | Xiaoyan Wang, Hongkai Wang, Jinghui Zhang, and Chun Zhang. Spare Parts Forecast Analysis based on Important Calculation of Element Fault Tree [J]. Int J Performability Eng, 2019, 15(7): 1878-1885. |
[7] | Yingsheng Mou, Zhiping Zhai, Xiaoyun Kang, Zhuwei Li, and Yuezheng Lan. Comparison of Fatigue Reliability Life of Telescopic Rod of an Eccentric Telescopic Rod Conveyor with and without Strength Degradation [J]. Int J Performability Eng, 2019, 15(7): 1868-1877. |
[8] | Risu Na, Xin Li, Jie Liu, and Yuan Liu. Reliability Analysis of Ring Mold Granulator based on Minimum Maintenance Model [J]. Int J Performability Eng, 2019, 15(7): 1860-1867. |
[9] | Haiyue Yu and Xiaoyue Wu. Simulation Method for Mission Reliability Assessment of Space Telemetry Tracking and Command System with Dynamic Redundancy [J]. Int J Performability Eng, 2019, 15(6): 1684-1691. |
[10] | Yonghua Li, Pengpeng Zhi, Bingzhi Chen, and Ziqiang Sheng. Resonance Reliability Analysis for Axle Box Bearing of EMU [J]. Int J Performability Eng, 2019, 15(6): 1652-1661. |
[11] | Kai Li, Wei Wu, and Fusheng Liu. Complex Network Reliability Analysis based on Entropy Theory [J]. Int J Performability Eng, 2019, 15(6): 1642-1651. |
[12] | Chetna Choudhary, P. K. Kapur, Sunil K. Khatri, and A. K. Shrivastava. Effort-based Release and Patching Time of Software with Warranty using Change Point [J]. Int J Performability Eng, 2019, 15(6): 1724-1733. |
[13] | Hatim Solayman Migdadi, Mohammad H. Almomani, Moustafa Omar Abu-Shawiesh, and Omar Meqdadi. Reliability Performance of Improved General Series-Parallel Systems in the Generalized Exponential Lifetime Model [J]. Int J Performability Eng, 2019, 15(6): 1734-1743. |
[14] | Achraf Wahid, Nadia Mouhib, Abderrazak Ouardi, Abdelkarim Kartouni, Hamid Chakir, and Mohamed ELghorba. Wire Rope Reliability Assessment based on Damage Mechanics [J]. Int J Performability Eng, 2019, 15(6): 1744-1750. |
[15] | Xiaoliang Ling, Yazhou Zhang, and Ping Li. Redundancy Optimization for Series and Parallel Systems Exposed to Random Shocks [J]. Int J Performability Eng, 2019, 15(5): 1427-1435. |
|