Product Quality Reliability Analysis based on Rough Bayesian Network

doi:10.23940/ijpe.20.01.p5.3747

Abstract

Abstract:

Simultaneous quality reliability analysis can detect the weak links in production process as early as possible, which can significantly improve product reliability. Aiming at the reliability in product quality, a model based on rough set and Bayesian network (RS-BN) is proposed in this paper. Simplify expert knowledge and reduce product quality factors using rough set theory, and the minimal product quality rules can be obtained. Then the Bayesian network is constructed and trained by the minimum rules. Based on the minimal rules, the complexity of Bayesian network structure and the difficulties of product reliability analysis are largely decreased. To verify the performance of the proposed RS-BN model, a competition dataset is utilized and four evaluation indicators are investigated, i.e., accuracy, F1-score, recall, and precision. Experimental results indicated that the proposed model is superior to the other three comparative models.

Key words: product quality, reliability analysis, Bayesian network, rough set, minimum rules

Wanjuan Zhang, Xiaodan Wang, Diego Cabrera, and Yun Bai. Product Quality Reliability Analysis based on Rough Bayesian Network [J]. Int J Performability Eng, 2020, 16(1): 37-47.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

References 37.

1.	C. F. J.Kuo, T. L. Su, P. R. Jhang, C. Y. Huang, and C. H. Chiu, “Using the Taguchi Method and Grey Relational Analysis to Optimize the Flat-Plate Collector Process with Multiple Quality Characteristics in Solar Energy Collector Manufacturing,” Energy, Vol. 36, No. 5, pp. 3554-3562, May 2011
2.	W. Zhang, Y. Yu, X. Zhou, S. Yang,C. Li, “Evaluating Water Consumption based on Water Hierarchy Structure for Sustainable Development using Grey Relational Analysis: Case Study in Chongqing, China,” Sustainability, Vol. 10, No. 5, pp. 1358, April 2018
3.	G. J. Geldhof, K. J. Preacher,M. J. Zyphur, “Reliability Estimation in a Multilevel Confirmatory Factor Analysis Framework,” Psychological Methods, Vol. 19, No. 1, pp. 72-91, October 2014
4.	R. Powers and B. Worley, “PCA as a Practical Indicator of OPLS-DA Model Reliability,” Curr Metabolomics, Vol. 4, No. 2, pp. 93-103, August 2016
5.	Y. Bai, Z. Sun, B. Zeng, J. Y. Long, L. Li, J. V. de Oliveira,C. Li, “A Comparison of Dimension Reduction Techniques for Support Vector Machine Modeling of Multi-Parameter Manufacturing Quality Prediction,” Journal of Intelligent Manufacturing, (online since January 05, 2018) (DOI 10.1007/s10845-017-1388-1)
6.	Y. F. Song, X. D. Wang, J. W. Zhu,L. Lei, “Sensor Dynamic Reliability Evaluation based on Evidence Theory and Intuitionistic Fuzzy Sets,” Applied Intelligence, Vol. 48, No. 11, pp. 3950-3962, May 2018
7.	K. Sohag and P. Yiannis, “A Review of Applications of Fuzzy Sets to Safety and Reliability Engineering,” International Journal of Approximate Reasoning, Vol. 100, pp. 29-55, September 2018
8.	Y. Q. Zhang, X. M. Ma, J. X. Yang,Y. N. Zhang,“Rough Set Fuzzy Neural Network Fault Diagnosis for the over Current Detection of Coal Mining Scraper,” Applied Mechanics and Materials, Vol. 321-324, pp. 2146-2151, June 2013
9.	W. Huang, F. Kong,X. Zhao, “Spur Bevel Gearbox Fault Diagnosis using Wavelet Packet Transform and Rough Set Theory,” Journal of Intelligent Manufacturing, Vol. 29, No. 6, pp. 1257-1271, August 2015
10.	Y. H. He, L. B. Wang, Z. Z. He,M. Xie, “A Fuzzy TOPSIS and Rough Set based Approach for Mechanism Analysis of Product Infant Failure,” Engineering Applications of Artificial Intelligence, Vol. 47, pp. 25-37, January 2016
11.	X. P. Yang, Y. Wang,M. Wang, Transmission System Reliability Evaluation based on one Direction S-Rough Set Theory,” Electric Power Automation Equipment, Vol. 36, No. 12, pp. 57-62, December 2016
12.	F. Pacheco, M. Cerrada, R. Sánchez, D. Cabrera, C. Li,J. L.Valente de Oliveira, “Attribute Clustering using Rough Set Theory for Feature Selection in Fault Severity Classification of Rotating Machinery,” Expert Systems with Applications, Vol. 71, pp. 69-86, April 2017
13.	Z. M. Zhang, “A Rough Set Approach to Intuitionistic Fuzzy Soft Set based Decision Making,” Applied Mathematical Modelling, Vol. 36, No. 10, pp. 4605-4633, October 2012
14.	L. R. Kashapova, D. L. Pankratov,P. P. Utyaganov, “An Expert System for Ensuring the Reliability of the Technological Process of Cold Sheet Metal Forming,” IOP Conference Series: Materials Science and Engineering, Vol. 134, pp. 012032, 2016
15.	Y. D. Zemenkov, V. V. Shalay,M. Y. Zemenkova, “Expert Systems of Multivariable Predictive Control of Oil and Gas Facilities Reliability,” Procedia Engineering, Vol. 113, pp. 312-315, July 2015
16.	J. Long, Z. Sun, C. Li, Y. Hong, Y. Bai,S. H. Zhang, “A Novel Sparse Echo Auto-Encoder Network for Data-Driven Fault Diagnosis of Delta 3D Printers,”IEEE Transactions on Instrumentation and Measurement, 2019
17.	C. Li, J. L.Valente de Oliveira, M. C. Lozada, D. Cabrera, V. Sanchez, and G. Zurita, “A Systematic Review of Fuzzy Formalisms for Bearing Fault Diagnosis,” IEEE Transactions on Fuzzy Systems,(online since October 2018)2018.2878200)
18.	C. Li, Y. Tao, W. Ao, S. Yang,Y. Bai, “Improving Forecasting Accuracy of Daily Enterprise Electricity Consumption using a Random Forest based on Ensemble Empirical Mode Decomposition,” Energy, Vol. 165, pp. 1220-1227, October 2018
19.	Y. Bai, Y. Li, B. Zeng, C. Li,J. Zhang, “Hourly PM2.5 Concentration Forecast using Stacked Autoencoder Model with Emphasis on Seasonality,” Journal of Cleaner Production, Vol. 224, No. 739-750, July 2019
20.	C. Li, R. V. Sánchez, G. Zurita, M. Cerrada,D. Cabrera, “Fault Diagnosis for Rotating Machinery using Vibration Measurement Deep Statistical Feature Learning,” Sensors, Vol. 16, No. 6, pp. 895, June 2016
21.	S. Zhang, Z. Sun, J. Long, C. Li,Y. Bai, “Dynamic Condition Monitoring for 3D Printers by using Error Fusion of Multiple Sparse Auto-Encoders,” Computers in Industry, Vol. 105, pp. 164-176, December 2018
22.	Q. Pan and D. Dias, “An Efficient Reliability Method Combining Adaptive Support Vector Machine and Monte Carlo Simulation,” Structural Safety, Vol. 67, pp. 85-95, July 2017
23.	J. G. Zhang, J. J. Chen,J. L. Du,“Reliability Analysis of a Mechanism with Grey System Parameters,” Advanced Materials Research, Vol. 538-541, pp. 3154-3159, June 2012
24.	M. M. Abaei, R. Abbassi, V. Garaniya, S. H. Chai,F. Khan, “Reliability Assessment of Marine Floating Structures using Bayesian Network,” Applied Ocean Research, Vol. 76, pp. 51-60, July 2018
25.	Z. Li, T. Xu, J. Gu, Q. Dong,L.Y. Fu, “Reliability Modeling and Analysis of a Multi-State Element based on a Dynamic Bayesian Network,” Royal Society Open Science, Vol. 5, No. 4, pp. 171438, April 2018
26.	H. Langseth and L. Portinale, “Bayesian Networks in Reliability,” Reliability Engineering and System Safety, Vol. 92, No. 1, pp. 92-108, January 2007
27.	I. Tien and A. D. Kiureghian, “Algorithms for Bayesian Network Modeling and Reliability Assessment of Infrastructure Systems,” Reliability Engineering and System Safety, Vol. 156, pp. 134-147, December 2016
28.	Z. K. Liu, Y. H. Liu, B. P. Cai, D. W. Zhang,C. Zheng, “Dynamic Bayesian Network Modeling of Reliability of Subsea Blowout Preventer Stack in Presence of Common Cause Failures,” Journal of Loss Prevention in the Process Industries, Vol. 38, pp. 58-66, November 2015
29.	I. Tien, “Bayesian Network Methods for Modeling and Reliability Assessment of Infrastructure Systems,” (online since February2017) (DOI 10.1007/978-3-319-52425-2_18)
30.	C. Wu, Y. Yong, M. Li,O. Adjei, “The Rough Set Theory and Applications,” Engineering Computations, Vol. 21, No. 5, pp. 488-511, 2004
31.	Z. Pawlak, “Rough Sets,” International Journal of Parallel Programming, Vol. 11, No. 5, pp. 341-356, October 1982
32.	D. Heckerman, D. Geiger,D. M. Chickering, “Learning Bayesian Networks: The Combination of Knowledge and Statistical Data,” Machine Learning, Vol. 20, No. 3, pp. 197-243, September 1995
33.	F. Sahin, M. C. Yavuz, Z. Arnavut,O. Uluyol, “Fault Diagnosis for Airplane Engines using Bayesian Networks and Distributed Particle Swarm Optimization,” Parallel Computing, Vol. 33, No. 2, pp. 124-143, March 2007
34.	Z. Xu, D. Gu,B. Yang, “Attribute Reduction Algorithm based on Genetic Algorithm,” in Proceedings of International Conference on Intelligent Computation Technology and Automation, Vol. 1, pp. 169-172, Changsha, China, October 2009
35.	B. Lerner and R. Malka, “Investigation of the K2 Algorithm in Learning Bayesian Network Classifiers,” Applied Artificial Intelligence, Vol. 25, No. 1, pp. 74-96, January 2011
36.	W. Y. Liu, K. Yue,J. D. Zhang, “Augmenting Learning Function to Bayesian Network Inferences with Maximum Likelihood Parameters,” Expert Systems with Applications, Vol. 36, No. 2, pp. 3497-3504, March 2009
37.	R. G. Cowell, A. P. Dawid, S. L. Lauritzen,D. J. Spiegelhalter, “Probabilistic Networks and Expert Systems. Statistics for Engineering and Information Science,” Springer-Verlag, New York, 1999

[1]	Liwei Chen, Jianhao An, Mingxin Du, and Kai Su. A New Method of Identifying the Prognostic Factors of Hepatocellular Carcinoma Patients [J]. Int J Performability Eng, 2023, 19(2): 85-93.
[2]	Yonghua Li, Shujian Liu, Xiaoning Bai, and Yufeng Wang. An Interval-Probability Hybrid Structural Reliability Calculation Method Based on CSSA-BR-BP [J]. Int J Performability Eng, 2023, 19(10): 687-699.
[3]	Jinxin Wang, Zhiping Zhai, Yuezheng Lan, Xiaoyi Zhai, and Lixiang Zhao. Reliability Analysis and Optimization of Forage Crushers Based on Bayesian Network [J]. Int J Performability Eng, 2023, 19(10): 700-709.
[4]	Risu Na, Weiguo Zhang, Kaifa Jia, and Quan Zhang. Key Factors of Seal Ring Reliability based on QFD [J]. Int J Performability Eng, 2022, 18(11): 759-769.
[5]	Redondin Maxime, Bouillaut Laurent, and Daucher Dimitri. EM Approach for Weibull Analysis in a Strongly Censored Data Context - Application to Road Markings [J]. Int J Performability Eng, 2021, 17(4): 333-342.
[6]	Murgayya S B, Suresh H N, Madhusudhan N, and Saravanabavan D. Optimization of High Speed Rotor-Bearings System to Assess the Reliability using XLrotor [J]. Int J Performability Eng, 2020, 16(7): 991-998.
[7]	Mohammed Bougofa, Abderraouf Bouafia, and Ahmed Bellaouar. An Integrated Quantitative Bayesian Network in Risk Management for Complex Systems [J]. Int J Performability Eng, 2020, 16(3): 354-366.
[8]	Xi Liu, Zhiyong Zhao, Haifeng Li, Chang Liu, and Shengli Wang. Defect Prediction of Radar System Software based on Bug Repositories and Behavior Models [J]. Int J Performability Eng, 2020, 16(2): 284-296.
[9]	Laurent Bouillaut, Olivier François, Yves Putallaz, Clément Granier and Christophe Cieux. A Hybrid Approach for the Evaluation of Rail Monitoring and Maintenance Strategies for the Grand Paris Express New Metro [J]. Int J Performability Eng, 2020, 16(11): 1685-1697.
[10]	Zheng Li, Jianwei Yang, Dechen Yao, Jinhai Wang and Qicheng Pang. Reliability Analysis of a Metro Braking Control System based on Fuzzy GO Method [J]. Int J Performability Eng, 2020, 16(11): 1826-1834.
[11]	Yali Lv, Jianai Wu, Junzhong Miao, Weixin Hu, and Tong Jing. Learning P2P Lending Credit Evaluation Bayesian Network from Missing Data [J]. Int J Performability Eng, 2019, 15(6): 1591-1599.
[12]	Lichun Chen, Junfang Xue, Xiufen Zhang, and Yanliang Wang. Optimization and Reliability Analysis of Movable Jaw Structure of Jaw Crusher based on Response Surface [J]. Int J Performability Eng, 2019, 15(5): 1408-1416.
[13]	Zhifeng Zhang and Junxia Ma. Feature Selection Combined Feature Resolution with Attribute Reduction based on Correlation Matrix of Equivalence Classes [J]. Int J Performability Eng, 2019, 15(4): 1131-1140.
[14]	Yali Lv, Tong Jing, Yuhua Qian, Jiye Liang, Jianai Wu, and Junzhong Miao. Bayesian Network Model for Learning Arithmetic Concepts [J]. Int J Performability Eng, 2019, 15(3): 939-948.
[15]	Chao Lin and Yanan Liu. Target Recognition and Behavior Prediction based on Bayesian Network [J]. Int J Performability Eng, 2019, 15(3): 1014-1022.