[1] J. F. An, Y. Wang, T. Zhang, T. G. Wang,F. W. Zhang, “The Improvement Design on Telescopic Rod Type Collecting Roller of Residual Film Recycling Machine,” Agricultral Equipment & Vehicle Engineering, Vol. 52, No. 3, pp. 7-9, 2014 [2] G. H. Li, Z. Zheng, Y. Zhao,Q. Niu, “The Design and Improvement of Eccentric Roller Type Residual Film Pickup Device,” Xinjiang Farm Research of Science and Technology, Vol. 38, No. 11, pp. 31-32, 2015 [3] Z. Q. Tian, “Research on the Design of Caragana Picking and Shredder,” Master Dissertation, Shanxi Agricultural University, 2014 [4] A. D'Amore and L. Grassia, “Constitutive Law Describing the Strength Degradation Kinetics of Fibre-Reinforced Composites Subjected to Constant Amplitude Cyclic Loading,” Mechanics of Time-Dependent Materials, Vol. 20, No. 1, pp. 1-12, 2016 [5] X. Zhao, X. Wang, Z. S. Wu,Z. G. Zhu, “Fatigue Behavior and Failure Mechanism of Basalt FRP Composites under Long-Term Cyclic Loads,”International Journal of Fatigue, Vol. 88, pp. 58-67, 2016 [6] A. Ince, “A Generalized Mean Stress Correction Model based on Distortional Strain Energy,”International Journal of Fatigue, Vol. 104, pp. 273-282, 2017 [7] D. H.Hwang and S. S. Cho, “Mean Stress Effects in Fretting Fatigue Life Estimation Method using Fatigue Damage Gradient Correction Factor,” Journal of Mechanical Science & Technology, Vol. 31, No. 9, pp. 4195-4202, 2017 [8] D. J. Bang, A. Ince,L. Q. Tang, “A Modification of UniGrow 2‐Parameter Driving Force Model for Short Fatigue Crack Growth,”Fatigue & Fracture of Engineering Materials & Structures, Vol. 42, pp. 45-60, 2019 [9] C. B. Su, Y. Shui, Z. L. Wang,T. Zafar, “A Time-Dependent Probabilistic Fatigue Analysis Method Considering Stochastic Loadings and Strength Degradation,” Advances in Mechanical Engineering, Vol. 10, No. 7, pp. 1-9, 2018 [10] Z. Q. Fu, Y. X. Wang, B. H. Ji,T. J. Liu, “Assessment Approach for Multiaxial Fatigue Damage of Deck and U-Rib Weld in Steel Bridge Decks,” Construction and Building Materials, Vol. 189, pp. 276-285, 2018 [11] J. X.Gao and Z. W. An, “A New Probability Model of Residual Strength of Material based on Interference Theory,”International Journal of Fatigue, Vol. 118, pp. 202-208, 2019 [12] Z. H. Yu, W. M. Wang, H. M. Cui,S. H. Wu, “Static Analysis of the Elastic Teeth of the Spring-Toothed Pickup Device,” Journal of Agricultural Mechanization Research, Vol. 39, No. 4, pp. 27-31, 2017 [13] X. Y. Kang, “Research on Parameter Analysis and Optimization Design of Eccentric Telescopic Rod Conveying Device,” Master Dissertation, Inner Mongolia University of Technology, 2018 [14] H. Liu, “Numerical Simulation of the Influence of Surface Integrity on Fatigue Properties,” Master Dissertation, Huazhong University of Science and Technology, 2014 [15] H. B.Lv and W. X. Yao, “Residual Strength Model for Component Fatigue Reliability Estimation,” Acta Aeronautica Sinica, Vol. 21, No. 1, pp. 74-77, 2000 [16] F. J. Zuo, “Research on Fatigue Life Prediction and Reliability Method of Mechanical Structures,” Master Dissertation, University of Electronic Science and Technology of China, 2016 [17] J. R.Schaff and B. D. Davidson, “Life Prediction Methodology for Composite Structures. Part I- Constant Amplitude and Two-Stress Level Fatigue,” Journal of Composite Materials, Vol. 31, No. 2, pp. 128-157, 1997 |