Int J Performability Eng ›› 2019, Vol. 15 ›› Issue (1): 220-229.doi: 10.23940/IJPE.19.01.P22.220229

Previous Articles     Next Articles

High-Level Feature Extraction based on Correlogram for State Monitoring of Rotating Machinery with Vibration Signals

Shaohua Yang, Guoliang Lu(), Aiqun Wang, and Peng Yan   

  1. Key Laboratory of High Efficiency and Clean Mechanical Manufacturing of MOE,National Demonstration Center for Experimental Mechanical Engineering Education,School of Mechanical Engineering, Shandong University, Jinan, 250061, China
  • Revised on ; Accepted on
  • Contact: Lu Guoliang E-mail:luguoliang@sdu.edu.cn

Abstract:

Vibration analysis is one of the most popular methods for state monitoring of rotating machines, and feature extraction is of much importance in the design of the monitoring system. In this paper, a new high-level feature extraction method based on correlograms for vibration signal analysis is proposed, and it includes two phases. Firstly, in the learning process, a codebook is created from training data using thek-means algorithm. Next, in the testing process, for a given data stream collected from a monitoring rotating machine, the correlogram in each cycle is obtained by comparing every data point with all codewords in the codebook at first; the entropy is then computed to form final high-level features to measure the state of the machine. A change decision can be made finally based on features extracted from null hypothesis testing. Based on an experimental setup used in our previous work, the proposed method is evaluated with application to the speed change monitoring of a rotating machine. Experimental results demonstrate the excellent performance and the priority of the method compared with ten typical features.

Key words: rotating machinery, vibration analysis, speed monitoring, feature extraction, correlogram