|
1. W. Kuo and M.J. Zuo, “Optimal reliability modelling”, Wiley, New York, 2003.
|
|
2. K.C. Kapur and L.R. Lamberson, “Reliability in engineering design”, Wiley, New York, 1977.
|
|
3. R.K. Iyer and D.P. Rossetti, “A measurement-based model for workload dependency of CPU errors”, IEEE Transactions on Computer; vol.35, no.6, pp. 511-519, 1986.
|
|
4. A. Barros, C. Berenguer and A. Grall, “Optimization of replacement times using imperfect monitoring information”, IEEE Transactions on Reliability, vol.52, no.4, pp. 523–533, 2003.
|
|
5. S.V. Amari, K.B, Krishna, H. Pham, “Tampered failure fate load-sharing systems: status and perspectives”. Handbook of Performability Engineering, pp. 291-308, 2008.
|
|
6. M. Jain, R. Gupta, “Load sharing M-out of-N: G system with non-identical components subject to common cause failure”, Int. J. Mathematics in Operational Research, vol.4, no.5, pp. 586-605, 2012.
|
|
7. L.Y. Wang, X.J. Jia and J. Zhang, “Reliability evaluation for Multi-State Markov repairable systems with redundant dependencies”, Quality Technology and Quantitative Management, vol.10, no.3, pp. 277-289, 2013.
|
|
8. H.Y. Yu, C.B. Chu, E. Chatelet and F Yalaoui, “Reliability optimization of a redundant system with failure dependencies”, Reliability Engineering and System Safety, vol.92, no.12, pp. 1627-1634, 2007.
|
|
9. G. Levitin and L.D. Xing, “Reliability and performance of multi-state systems with propagated failures having selective effect”, Reliability Engineering and System Safety, vol. 95, no. 6, pp. 655–661, 2010.
|
|
10. G. Maaroufi, A. Chelbi and N. Rezg, “Optimal selective renewal policy for systems subject to propagated failures with global effect and failure isolation phenomena”, Reliability Engineering and System Safety, vol. 114, no. 6, pp. 61-70, 2013.
|
|
11. L.Y. Wang and S.B. Si, “Reliability analysis of circular Markov repairable systems with spatial dependence”, Journal of northwestern polytechnical university, vol. 32, no. 6, pp. 923-928, 2014.
|
|
12. F. Ball, R.K. Milne and G.F. Yeo, “Multivariable semi-Markov analysis of burst properties of multi-conductance single ion channels”, Journal of Applied Probability, vol. 39, no. 1, pp. 179-196, 2002.
|
|
13. A. Lisnianski and G. Levitin, “Multi-state system reliability, assessment, optimization and application”, Singapore: World Scientific Publishing Co. Pte. Ltd., 2003.
|
|
14. D.V. Widder, “The Laplace Transform”, Princeton University Press, 1946.
|
|
15. N. Saqib, and M.T. Siddiqi, “Aggregation of safety performance indicators to higher-level indicators”, Reliability Engineering and System Safety, vol. 93, no. 2, pp. 307-315, 2008.
|
|
16. L.Y. Wang and L.R. Cui, “Performance evaluation of aggregated Markov repairable systems with multi-operating levels”, Asia-Pacific Journal of Operational Research, vol. 30, no. 4, pp. 1350003-1-27, 2013.
|