Failure Mechanism and Reliability of the Square Baler Knotter

doi:10.23940/ijpe.19.02.p6.406415

Abstract

Abstract:

The D-knotter is the core institution of the small baling machine, and it is affected by the quality of the machine, the working environment, the use and maintenance, and other factors. The knotter in the actual baling operation often fails to achieve the premature failure of the service life, reduces the harvesting efficiency of forage grass and straw, and increases maintenance costs. Therefore, by analyzing the failure modes and failure mechanism of the knotter, the root cause of the knotter failure is determined to be the wear of five different-sided shaft holes on the frame body. By installing bronze bearings lubricated with lithium grease on the shaft holes of the frame body, the wear of the shaft hole can be greatly reduced, thereby greatly improving the reliability of the knotter.

Key words: knotter, failure type, failure mechanism, reliability

Haitang Cen, Xueke Si, Yongdong Zheng, and Ruitao Wei. Failure Mechanism and Reliability of the Square Baler Knotter [J]. Int J Performability Eng, 2019, 15(2): 406-415.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

Figures/Tables 13

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

Figure 7

Figure 8

Figure 9

Figure 10

Figure 11

Figure 12

Figure 13

References 16

1	L.J. Chen, C. Li, A.Q.Zhang, H.T.Li, L.J.Han, “Reconfiguration and Motion Simulation of D Type Knotter based on Reverse Engineering,” Journal of Agricultural Machinery, Vol. 45, No.12, pp. 104-108+125,2014
2	F.M.Li, X.J.Zhao, X.X.Zhai, “The Key Components and Working Principles of D Type Knotter,” in Proceedings of 2012 China Agricultural Machinery Association International Academic Annual Conference, China Agricultural Machinery Society, 2012
3	X. Gao, Y. Tang, D.Y. Hu, “D Type Knotter Driving Gear Wheel Mechanism Analysis”, Journal of Agricultural Mechanization Research, Vol. 39, No. 2, pp.27-31, 2017
4	C. Li, “Motion Simulation of Reverse Reconstructed D-Bale Knotter and Bill Hook Mechanical Analysis During Straw Baling,”Beijing Agricultural University, Beijing, 2015
5	A. Q.Zhang, Y. Y.Feng, H. Dong, S. Y.Zhang, L. J.Han, “D Type Knotter and Knot Holder Space Angle Parameter Analysis,”Journal of Agricultural Machinery, No. 8, pp.1-11, 2018
6	A.Q. Zhang, “D Knotting Machine Spatial Structure Parameter Analysis and Precision Manufacturing,” China Agricultural University, 2017
7	Schumacher and H. Guenter,“Twine Tie Knotter,” WO0221902,2002
8	J. Lu, “Straw Balers D-Knotting Structure and Parameter Optimization,” Northeast Agricultural University, Harbin, 2014
9	D.Z. Ren, “D Type Knotter Driving Gear Wheel Mechanism Analysis,” Inner Mongolia Agricultural University, Hohhot, 2013
10	D.Z. Ren, C.G. Wang, X.Y. Li, T.Y. Ulam, J.M. Sui, “D Type Knotting Machine Driving Gear Disc Modal Analysis Research,”Agricultural Mechanization Research, Vol. 36, No.5, pp. 58- 61+65,2014
11	L.Wang, H.Z.Lv, W.J.Wei, L.J.Han, S. Y. Zhang, “Analysis and Visual Validation of Knot Tying Pliers and Biting Rope Analysis”, Journal of agricultural machinery, Vol. 43, No. 2, pp.96-100, 2012
12	Q.H.Wan, K.Bu, and Y.Li, “The Analysis of Material and Fatigue Life for Knotting Hooker”, Journal of Agricultural Mechanization Research, Vol. 33, No. 4, pp.126-129, 2011
13	R.T.Wei, H.T.Ceng, P.W.Li, “Failure Analysis and Research Progress of D Type Knotter”, Journal of Chinese Agricultural Mechanization, Vol. 38, No. 3, pp.14-18, 2017
14	X.X.Wang, “Knot Buckle Mechanism Reliability Design and Knot Test,” Jiangsu University, 2017
15	Y.Xiong, H.T. Li, and S.Y. Zhang, “Motion Laws and Design Basis of the Knotter Wiper Mechanism”, Journal of Agricultural Mechanization Research, Vol. 37, No. 7, pp.113-118, 2015
16	J.J.Yin, S.Li, Y.M. Li, “D Knotting Machine and its Auxiliary Mechanism Motion Simulation and Timing Analysis”, ActaAgronomicaSinica, Vol. 42, No. 6, pp.103-107, 2011

[1]	Amit Kumar Singh and P. C. Tewari. An Overview of Reliability, Availability, Maintainability, and Safety Strategies for Complex Systems in Various Process Industries [J]. Int J Performability Eng, 2023, 19(12): 788-796.
[2]	Yonghua Li, Shujian Liu, Xiaoning Bai, and Yufeng Wang. An Interval-Probability Hybrid Structural Reliability Calculation Method Based on CSSA-BR-BP [J]. Int J Performability Eng, 2023, 19(10): 687-699.
[3]	Jinxin Wang, Zhiping Zhai, Yuezheng Lan, Xiaoyi Zhai, and Lixiang Zhao. Reliability Analysis and Optimization of Forage Crushers Based on Bayesian Network [J]. Int J Performability Eng, 2023, 19(10): 700-709.
[4]	Yu-Lun Chao, Yi-Kuei Lin, and Cheng-Ta Yeh. AMC-Based Algorithm for Network Reliability Evaluation of a Manufacturing System with Scrapping and Rework [J]. Int J Performability Eng, 2022, 18(4): 231-240.
[5]	Madhumitha J, and G. Vijayalakshmi. Multi-State Performance Analysis of Linear Consecutive 2-out-of-4: F System using Markov Reward Model [J]. Int J Performability Eng, 2022, 18(12): 903-910.
[6]	Risu Na, Weiguo Zhang, Kaifa Jia, and Quan Zhang. Key Factors of Seal Ring Reliability based on QFD [J]. Int J Performability Eng, 2022, 18(11): 759-769.
[7]	Tae-Jin Yang. Comparative Analysis on the Reliability Performance of NHPP Software Reliability Model Applying Exponential-Type Lifetime Distribution [J]. Int J Performability Eng, 2022, 18(10): 679-689.
[8]	Surbhi Gupta, H.D. Aroraa, Anjali Naithania, Anil Chandrab. Reliability Assessment of the Planning and Perception Software Competencies of Self-Driving Cars [J]. Int J Performability Eng, 2021, 17(9): 779-786.
[9]	Tyler D. Ridder and Ram M. Narayanan. Radar Detection Performability under Graceful Degradation [J]. Int J Performability Eng, 2021, 17(8): 666-675.
[10]	Yi-Chun Cheng, Yi-Kuei Lin, and Ping-Chen Chang. Reliability Evaluation for a Multistate Network with Time Attribute and Periodical Maintenance [J]. Int J Performability Eng, 2021, 17(8): 676-685.
[11]	Yi-Fan Chen, Yi-Kuei Lin, and Cheng-Fu Huang. Using Deep Neural Networks to Evaluate the System Reliability of Manufacturing Networks [J]. Int J Performability Eng, 2021, 17(7): 600-608.
[12]	Youssef Bassir, Achraf Wahid, Abdelkarim Kartouni, and Mohamed ELghorba. Estimation of Wire Rope Reliability by Two Analytical Approach [J]. Int J Performability Eng, 2021, 17(7): 619-626.
[13]	Rahul Ray, Shiva Shankar Choudhary, and Lal Bahadur Roy. Reliability Analysis of Layered Soil Slope Stability using ANFIS and MARS Soft Computing Techniques [J]. Int J Performability Eng, 2021, 17(7): 647-656.
[14]	Yi-Hao Chiu, Yi-Kuei Lin, and Thi-Phuong Nguyen. Network Reliability of a Stochastic Online-Food Delivery System with Space and Time Constraints [J]. Int J Performability Eng, 2021, 17(5): 433-443.
[15]	Saurav Shekhar Kar and Lal Bahadur Roy. Reliability Analysis of a Finite Slope Considering the Effects of Soil Uncertainty [J]. Int J Performability Eng, 2021, 17(5): 473-483.