Int J Performability Eng ›› 2017, Vol. 13 ›› Issue (4): 409-417.doi: 10.23940/ijpe.17.04.p8.409417

• Original articles • Previous Articles     Next Articles

Performance Analysis of DPPM Modulation based on Pulsed Fiber Laser

Dongya Xiaoa, Hongzuo Lia, and Huiying Zhanga, b   

  1. aSchool of Electronics and Information Engineering Information, Changchun University of Science and Technology, Changchun 130022, Jilin, China
    bSchool of Information and Control Engineering, Jilin Institute of Chemical Technology, Jilin 132022, China

Abstract:

This paper presents the combination of pulse position modulation (PPM) and pulsed fiber laser in order to improve the problem that the pulsed fiber laser with high power but low repetition frequency results in lower data transmission rate and limits its application. We compare the bandwidth requirement, power requirement, bandwidth utilization and error performance of several schemes of LPPM, DPPM, MPPM and OOK. Also, the modulation rate of three PPM based on fiber laser is obtained. It is shown that DPPM performs best in bandwidth requirement, bandwidth utilization and modulation rate. Moreover, DPPM doesn’t require symbol synchronization, which is of great importance in optical communication system. Then the optimal value for DPPM and modulation characteristic of fiber laser are presented. Finally, through simulation and test, we get the results, which shows the feasibility of the scheme.


Submitted on February 8, 2017; Revised on April 25, 2017; Accepted on June 19, 2017
References: 10